|
Hawk HP Plus Front Brake Pads for EVO 6/7/8/9 HB453N.585-1
|
|
Hawk HP Plus Rear Brake Pads for EVO 6/7/8/9 HB180N.560
|
|
Ferodo DS2500 Rear Pads for EVO 6/7/8/9 FCP1562H-2
|
|
|
|
|
|
|
|
Hawk HP Plus Front Brake Pads for EVO 6/7/8/9 HB453N.585-1
HP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials. Extremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.
Part Number HB453N.585-1
|
Hawk HP Plus Rear Brake Pads for EVO 6/7/8/9 HB180N.560
HP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials. Extremely high coefficient of friction makes HP Plus the perfect upgrade over stock for high performance streetcars used in autocross competition or that experience repetitive, heavy braking.
Part Number HB180N.560
|
Ferodo DS2500 Rear Pads for EVO 6/7/8/9 FCP1562H-2
This race developed pad has all the qualities of a world beating high performance street pad. Its consistent coefficient of friction (0.50) at any temperature, low or high, gives very predictable braking and great pedal modulation. This new generation of friction material is very low in compressibility ensuring a firm pedal feel while still providing great life for both rotor and pad. This brake pad has moderate dust levels and can make a little noise if not bedded properly but is the brake pad for a driver who demands the ultimate in braking performance.
A quantity of 1 is for an axle set (4 pads).
Part Number FCP1562H-2
|
|
|
|
Ferodo DS2500 Front Pads for EVO 6/7/8/9 - FCP1334H-1 FCP1334H-1
|
|
Ferodo DS2500 Front Pads for EVO 6/7/8/9 - FRP3067H FRP3067H
|
|
Ferodo DS2500 Rear Pads for EVO 6/7/8/9 - FCP1562H FCP1562H
|
|
|
|
|
|
|
|
Ferodo DS2500 Front Pads for EVO 6/7/8/9 - FCP1334H-1 FCP1334H-1
This race developed pad has all the qualities of a world beating high performance street pad. Its consistent coefficient of friction (0.50) at any temperature, low or high, gives very predictable braking and great pedal modulation. This new generation of friction material is very low in compressibility ensuring a firm pedal feel while still providing great life for both rotor and pad. This brake pad has moderate dust levels and can make a little noise if not bedded properly but is the brake pad for a driver who demands the ultimate in braking performance.
A quantity of 1 is for an axle set (4 pads).
|
Ferodo DS2500 Front Pads for EVO 6/7/8/9 - FRP3067H FRP3067H
Ferodo EVO "Fast Road" DS2500 compound pads are direct replacements for your Brembo stock pads.
TECH TIP: These pads are designed for the more aggressive driver who likes to track race, auto cross, and head fast into turns.
Fits: Mitsubishi Lancer Evolution VIII, IX, X
Part # FRP3067H
|
Ferodo DS2500 Rear Pads for EVO 6/7/8/9 - FCP1562H FCP1562H
Ferodo EVO "Fast Road" DS2500 compound pads are direct replacements for your Brembo stock pads.
TECH TIP: These pads are designed for the more aggressive driver who likes to track race, auto cross, and head fast into turns.
Fits: Mitsubishi Lancer Evolution VIII, IX 2003-2007
Part # FCP1562H
|
|
|
|
Ferodo DS3000 Rear Brake Pads - EVO 8 / 9 FCP1562R
|
|
Ferodo DS3000 Front Brake Pads - EVO 8 / 9 / X FRP3067R
|
|
Mitsubishi OEM DOT 3 Brake Fluid - EVO 8 / 9 / X MZ311987
|
|
|
|
|
|
|
|
Ferodo DS3000 Rear Brake Pads - EVO 8 / 9 FCP1562R
The Ferodo DS3000 is a full race pad for dedicated track Evos that offer a very high average (0.62) coefficient of friction, flat torque curve, and very good modulation characteristics.
TECH TIP: DS3000 is a race-only compound, and is not to be used on street driven Evolutions
Fits: Mitsubishi Lancer Evolution VIII, IX 2003-2007
Part # FCP1562R
|
Ferodo DS3000 Front Brake Pads - EVO 8 / 9 / X FRP3067R
The Ferodo DS3000 is a full race pad for dedicated track Evos that offer a very high average (0.62) coefficient of friction, flat torque curve, and very good modulation characteristics.
TECH TIP: DS3000 is a race-only compound, and is not to be used on street driven Evolutions
Fits: Mitsubishi Lancer Evolution VIII, IX, X
Part # FRP3067R
|
Mitsubishi OEM DOT 3 Brake Fluid - EVO 8 / 9 / X MZ311987
This is genuine Mitsubishi OEM fluid, the same DOT 3 brake fluid Mitsubishi put in your car from the factory!
TECH TIP: Price is for a standard 354ml bottle.
Fits: Mitsubishi Lancer Evolution VIII, IX, X
Part # MZ311987
|
|
|
|
STM FRONT DRAG BRAKE KIT EVO VIII-IX
|
|
STM REAR DRAG BRAKE KIT EVO VIII-IX
|
|
STM HYDRAULIC STAGING/E-BRAKE KIT EVO VIII-IX
|
|
|
|
|
|
|
|
STM Front Drag Brake Kit
- Evo VIII-IX
STM Front Drag Brake Kits for Evo VIII-IX allow you to ditch the weight of your big, heavy Brembos and rotors and clears room to run 15" wheels and slicks for drag racing applications. We all know less rotating mass is the best way to free up power! The STM brake kits inlcude Wilwood calipers and your choice of the standard rotor or the lightweight scalloped rotor, custom STM aluminum mounting brackets, black anodized rotor hats, STM brake lines and all mounting hardware.
|
STM Lightweight Rear Drag Brake Kit
- Evo VIII-IX
The STM Lightweight Rear Drag Brake Kit for Evo VIII-IX allows you to ditch the weight of your big, heavy Brembos and rotors and clears room to run smaller wheels and slicks. With a total weight of only 8.7 pounds per side with the scalloped rotor, we all know less rotating mass is the best way to free up power! The STM brake kits inlcude Wilwood calipers and your choice of the standard rotor or the lightweight scalloped rotor, custom STM aluminum mounting brackets, black anodized rotor hats, STM brake lines and all mounting hardware.
|
The STM Staging Brake / E-Brake Kit for Evo VIII-IX allows you to install a CNC staging brake, while utilizing your factory E-Brake handle.
All necessary hardware and high-quality stainless steel brake lines are included for install.
This kit only works on Evos without ABS and was designed with Drag racing in mind. We do not suggest road racing or anything like that with this kit. It will work fine for daily driving but it is intended for off road use only.
|
|
|
|
Grimmspeed Master Cylinder Brace - Mitsubishi Evo 8/9
|
|
STM FRONT DRAG BRAKE KIT MITSUBISHI LANCER EVOLUTION EVO VIII IX 8 9
|
|
Mitsubishi Evolution 8/9 DBA 4000 Slotted Front Rotor
|
|
|
|
|
|
|
|
|
The GrimmSpeed Master Cylinder Brace takes a beating and comes back for more! Crafted from hardcore CNC laser cut 12L14 with multi-point welded fabrication. It is the Abrams Tank of master cylinder braces touting 5 factory mounting points, the most available from any brace. Powdercoated black this brace will outlive your car and win you some style points to boot. Most importantly this brace kit will kill your wimpy pedal feel and give you the immediate and tight response that your performance car deserves and needs when you hit the track or rally. This brace will give you the confidence similar to that of SS braided brake lines with precision stopping. Not to mention street driving just got a whole lot more fun!
|
STM Front Drag Brake Kit for Evo VIII-IX allows you to ditch the weight of your big, heavy Brembos and rotors and clears room to run smaller wheels and slicks.
This brake set-up is specifically designed for Drag Racing.
This is not intended for constant, on/off braking as in road-racing or autocross.
We run this system on the streets and recently the STM Front Brakes assisted a customer's Evo to take the #1 spot as fastest stock turbo, stock motor Evo!
|
The 4000 Series Wiper-Slot rotor has a unique 6x6 slotted design for extreme stopping power on the road and the track. As with every DBA rotor, the 4000 Series rotor bolts right onto the vehicle with no mechanical changes needed.
DBA's mid-series, enhanced-performance, slotted rotor features Thermal Stability Profiling (TSP) for improved heat handling and Thermo-Graphic paint markings for effective heat monitoring.
|
|
|
|
Mitsubishi Evolution 8/9 DBA 4000 Slotted Rear Rotors dba4000evorear
|
|
|
|
|
|
|
|
The 4000 Series Wiper-Slot rotor has a unique 6x6 slotted design for extreme stopping power on the road and the track. As with every DBA rotor, the 4000 Series rotor bolts right onto the vehicle with no mechanical changes needed.
DBA's mid-series, enhanced-performance, slotted rotor features Thermal Stability Profiling (TSP) for improved heat handling and Thermo-Graphic paint markings for effective heat monitoring.
|
|
|
