|
MAP Oil Return Line Kit / Stainless Hose DSM MAP DSM-ORL-SS
|
|
STM INTAKE MANIFOLD SENSOR ADAPTER 95-99 DSM EVO VIII-IX
|
|
STM ALUMINUM VALVE COVER -6AN FITTING 90-99 DSM
|
|
|
|
|
|
|
|
MAP Oil Return Line Kit / Stainless Hose DSM MAP DSM-ORL-SS
This kit utilizes billet aluminum flanges, shadow series fittings and stainless steel hose for a clean look!
Includes 12" of hose and all necessary hardware! Now includes OEM oil drain to pan gasket as well as the washers to prevent leakage from the threads of the fasteners! (Not pictured)
|
STM INTAKE MANIFOLD SENSOR ADAPTER 95-99 DSM EVO VIII-IX
The STM intake manifold sensor adapter gives you an 1/8" NPT thread allowing you to cleanly attach a map sensor, pressure sensor (or any other of your choice) directly on your Evo VIII-IX or 95-99 DSM factory manifold.
- Aluminum Fitting
- Includes 2 Stainless Bolts
- Made in the USA
|
Always looking for ways to make the engine bay cleaner, lighter and easier to work with, STM designed these little, aluminum fittings to allow you to simply install -6AN lines and fittings for a catchcan or breather right onto your valve cover.
As the piece itself is a very tight fit, we would definitely recommend a bit of glue or epoxy to help hold it in place in the valve cover upon install.
|
|
|
|
STM ANODIZED RADIATOR BRACKETS 2G 95-99 DSM
|
|
STM POLISHED RADIATOR BRACKETS 2G 95-99 DSM
|
|
STM BRUSHED ALUMINUM BATTERY TIE DOWN EVO VIII-IX
|
|
|
|
|
|
|
|
This is another great product from STM, made right here in Rochester, NY to replace your ugly, stock radiator brackets. They are cut from aluminum, polished to a mirror shine, then dipped in a black anodize for a stealthy look. We also include the stainless steel allen cap bolts to finish the look.
The price is for both brackets and 4 bolts. You will need to transfer your rubber inserts over (and they are really easy to push out with your fingers.)
If you drive your DSM in the winter and salt, you know how horribly corroded they can become, and how they can ruin a beautiful engine bay
|
This is another great product from STM, made right here in Rochester, NY to replace your ugly, stock radiator brackets. They are cut from aluminum and polished to a mirror shine. We also include the stainless steel allen cap bolts to finish the look.
The price is for both brackets and 4 bolts. You will need to transfer your rubber inserts over (and they are really easy to push out with your fingers.)
If you drive your DSM in the winter and salt, you know how horribly corroded they can become, and how they can ruin a beautiful engine bay!.
|
These are a great, simple engine dress up piece. We all know the stock battery is ugly and heavy, but alot of you guys are running some pretty serious stereo systems and can't go to the small battery kits. Our STM battery tie down is brushed aluminum and made right here in Rochester, NY. Get rid of the black, rusted, stock piece and give your engine bay appearance an extra boost.
|
|
|
|
STM PROCLASSIC OIL RETURN LINE KIT
|
|
STM OIL COOLER DELETE (90-99 DSM)
|
|
STM STAINLESS ALLEN CAP VALVE COVER BOLT KIT (90-99 DSM)
|
|
|
|
|
|
|
|
Our STM Fuel Feed Kit for the 90-99 DSM includes all -6AN fittings, hardware and ProClassic line to go from your stock fuel filter location to your fuel rail inlet. We even included 2 stainless steel alan bolts for your fuel rail.
Our new kit includes ALL anodized fittings to accomodate all types of fuels, so it's safe to use with E-85, Methanol and race gas.
|
If you plan on removing your engine oil cooler, all the lines and all the weight, this simple kit is all you'll need.
|
Sick of trying to chase down the right size allan cap bolts for your valve cover?
Not to worry, here they all are.
If you just took the time to have your valve cover painted or powdercoated or if you're just plain sick of the ugly rusted factory bolts, you're gonna want these!
|
|
|
|
STM OIL PAN BOLT KIT 90-99 DSM
|
|
STM BALANCE SHAFT ELIMINATOR KIT 4G63
|
|
STM SHIFTER CABLE BEARING KIT
|
|
|
|
|
|
|
|
If you're assembling a new motor with a brand new, shiny oil pan, you just can't put on those nasty, old bolts!
Our oil pan bolt kit includes all the stainless bolts you'll need to bolt your pan to your 6 bolt or 7 bolt 4g63. Includes 2 shorter bolts for the timing belt side.
And, of course, the oil pan is not included, this price is just for the stainless steel bolts.
|
STM BALANCE SHAFT ELIMINATOR KIT 4G63
Get this now if you haven't already! Our own STM kit includes Clevite block off bearings, an OEM mitsubishi stubby shaft, and an OEM mitsubishi block off plate for your front cover.
4G63.
90-99 DSM.
Evo VIII-IX.
|
STM SHIFTER CABLE BEARING KIT
This kit will achieve a very firm shift. You'll need to press these in, but if you don't have a press, "big ass C-clamps" have been known to do the trick.
|
|
|
|
STM STAINLESS CLUTCHLINE | MASTER TO SLAVE CYLINDER 90-99 DSM
|
|
STM OIL PRESSURE GAUGE INSTALL KIT (AT HEAD) 90-99 DSM
|
|
STM ABS DELETE KIT 90-94 DSM
|
|
|
|
|
|
|
|
STM has teamed up with Goodridge to bring you our new 90-99 DSM Stainless Clutchline to run from your Master Clyinder direct to your Slave Cylinder.
Includes all fittings pictured and featured a 90° angled end for easy install.
|
Ever have problems finding a place to tap for oil pressure?
With our kit, you can tap into the factory port on the head of your 90-99 DSM allowing you to use your filter housing to feed the turbo.
Comes with everything you will need to cleanly install your oil pressure gauge sending unit out of the way.
Works with any 1/8" NPT sender.
|
The STM ABS Delete Kit includes everything you will need to remove the clutter and weight of your rusty, old, factory ABS system. Comprised of OEM components, high-quality fittings and stainless-steel, braided and coated lines.
90-94 DSM. FWD & AWD.
Please note this kit does not include rear stainless lines.
|
|
|
|
STM ABS DELETE KIT 95-99 DSM
|
|
STM HP THROTTLE BODY SHAFT SEALS
|
|
Omnipower 4bar Speed Density Map Sensor Evo 8/9 Omni 4bar Evo
|
|
|
|
|
|
|
|
The STM ABS Delete Kit includes everything you will need to remove the clutter and weight of your rusty, old, factory ABS system. Comprised of OEM components, high-quality fittings and stainless-steel, braided and coated lines.
90-94 DSM. FWD & AWD.
Please note this kit does not include rear stainless lines.
|
STM High Pressure Throttle Body Shaft Seals. Sold as a pair.
When these seals wear out, they can cause leaks, sticking, and jamming of the throttle plate.
We tested a car on our dyno at STM with OEM leaky seals...
When the seals were replaced, we picked up 20 whp and 20 ft pounds! Incredible Boost Leak!
|
Omni Power USA 3, 4 & 7 Bar MAP (Manifold Absolute Pressure) sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. Pressure changes are calculated on a true linear 0-5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows the Omni Power USA 4 Bar MAP sensor to remain a minimum of 99% accurate from 32 degrees F to 180 degrees F through out its range of scale.
|
|
|
|
STM REAR CAMBER KIT 2G DSM (95-99)
|
|
|
|
|
|
|
|
Time to fix that rear camber of yours!
This kit will fit your 95-99 Eclipse and Talon, turbo and non-turbo models.
Includes both sides.
|
|
|
