|
STM FRONT MOUNT INTERCOOLER EVO X
|
|
STM FRONT DRAG BRAKE KIT EVO X
|
|
STM ALUMINUM UPPER INTERCOOLER PIPE KIT EVO X
|
|
|
|
|
|
|
|
STM Front Mount Intercooler
- Evolution X 4B11
The all new STM Evo X Intercooler is made in-house from a 750 HP-rated 3" Garrett core with tig-welded, aluminum end tanks and bead-rolled 2.5" pipe outlets. Pressure tested to 50 psi. This intercooler is a stock-replacement and will bolt right up to your factory couplers, or stock-location, aftermarket piping.
|
STM Front Drag Brake Kit
- Evolution X
STM Front Drag Brake Kits for Evo X allow you to ditch the weight of your big, heavy Brembos and rotors and clears room to run 15" wheels and slicks for drag racing applications. We all know less rotating mass is the best way to free up power! The STM brake kits inlcude Wilwood calipers and your choice of the standard rotor or the lightweight scalloped rotor, custom STM aluminum mounting brackets, black anodized rotor hats, STM brake lines and all mounting hardware.
|
STM Upper Intercooler Pipe Kit
- Evo X
The STM Upper Intercooler Pipe Kit for the Evo X is tig welded, 2.5" aluminum piping for light-weight benefits and includes 6 stainless T-Bolt clamps and 3 high-quality black, STM silicone couplers.
Allows you to remove the super-restrictive 1.75" factory pipe, while freeing up air flow and adding some polished shine to your engine bay.
|
|
|
|
STM INTAKE PIPE KIT EVO X
|
|
STM BOOST LEAK TESTER
|
|
STM SILICONE STRAIGHT COUPLERS
|
|
|
|
|
|
|
|
STM Intake Pipe Kit
- Evolution X 4B11
The all new STM Evo X Intake Pipe Kit is tig-welded in-house of 3" lightweight aluminum and incorporates a 6" velocity stack to utilize the air space of the giant K&N filter. We include an aluminum intake heat shield, STM silicone couplers, clamps, brass fittings, block off's and all hardware for a clean install.
|
One of the easiest ways to lose power is to have a simple leak in your system. The STM Boost Leak Tester comes with your choice of STM Reducer Coupler to match your turbo outlet, T-Clamps and 3" aluminum coupler with nozzle to test your boost pressure and ensure your set-up is solid.
|
We have searched out the very best silicone hose manufacturers and are proud to offer our own brand of STM silicone couplers. We would not put our name on these if they were nothing less than the best.
|
|
|
|
STM SILICONE HUMP COUPLERS
|
|
STM SILICONE REDUCER COUPLERS
|
|
STM SILICONE ELBOW COUPLERS (45°)
|
|
|
|
|
|
|
|
We have searched out the very best silicone hose manufacturers and are proud to offer our own brand of STM silicone couplers. We would not put our name on these if they were nothing less than the best.
|
We have searched out the very best silicone hose manufacturers and are proud to offer our own brand of STM silicone couplers. We would not put our name on these if they were nothing less than the best.
|
We have searched out the very best silicone hose manufacturers and are proud to offer our own brand of STM silicone couplers. We would not put our name on these if they were nothing less than the best.
|
|
|
|
STM SILICONE ELBOW COUPLERS 90°
|
|
STM CLUTCH FORK STOP EVO VIII-IX-X
|
|
|
|
|
|
|
|
We have searched out the very best silicone hose manufacturers and are proud to offer our own brand of STM silicone couplers. We would not put our name on these if they were nothing less than the best.
|
This piece is designed to stop the clip on your clutch from popping out due to hard shifting. It is an extremely common and irritating problem for anyone that has Multi-Plate clutch.
This product is meant to be preventive maintenance and we recommend you install this along with your clutch... don't wait for it to pop on you! It is an extremely easy install and takes only a few minutes to adjust the bolt.
|
|
|
