|
Rennline 997/996/Boxster/Cayman Front Tie Down / Jack Plate E32
|
|
Rennline Tie Downs (set of 2) - 45* Red E04-45-red
|
|
Rennline Tie Downs (set of 2) - 66* Red E04-66-red
|
|
|
|
|
|
|
|
|
Securing a 997/996/Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torqued bolts.
|
Rennline's tie-down brackets are made of either stainless steel, or mild steel in red powdercoat. These brackets are available in four variations, straight, 90 degree, 66 degree, and 45 degree to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.
The 66 degree tie downs are designed specifically for 996/997 with upgraded rear sway bars. GT2 and GT3 cars will also use the 66 degree tie down
|
Rennline's tie-down brackets are made of either stainless steel, or mild steel in red powdercoat. These brackets are available in four variations, straight, 90 degree, 66 degree, and 45 degree to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.
|
|
|
|
Rennline Tie Downs (set of 2) - 66 Degree Stainless Steel E04-66-ss
|
|
Rennline Tie Downs (set of 2) - 90* Red E04-90-red
|
|
Rennline Tie Downs (set of 2) - 90* Stainless Steel E04-90-ss
|
|
|
|
|
|
|
|
|
Rennline's tie-down brackets are made of either stainless steel, or mild steel in red powdercoat. These brackets are available in four variations, straight, 90 Degrees, 66 Degrees, and 45 Degrees to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.
|
Rennline's tie-down brackets are made of either stainless steel, or mild steel in red powdercoat. These brackets are available in four variations, straight, 90 degree, 66 degree, and 45 degree to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.
The 66 degree tie downs are designed specifically for 996/997 with upgraded rear sway bars. GT2 and GT3 cars will also use the 66 degree tie down
|
Rennline's tie-down brackets are made of either stainless steel, or mild steel in red powdercoat. These brackets are available in four variations, straight, 90 degree, 66 degree, and 45 degree to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.
|
|
|
|
Rennline Tie Downs (set of 2) - Flat Stainless Steel E04-flat-ss
|
|
Rennline Tie Downs (set of 2) - Flat Red E04-flat-red
|
|
Rennline Race Hook (universal) 5,6,7, or 8 inch - Porsche E01X
|
|
|
|
|
|
|
|
|
Rennline's tie-down brackets are made of either stainless steel, or mild steel in red powdercoat. These brackets are available in four variations, straight, 90 degree, 66 degree, and 45 degree to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.
|
Rennline's tie-down brackets are made of either stainless steel, or mild steel in red powdercoat. These brackets are available in four variations, straight, 90 degree, 66 degree, and 45 degree to allow you to install these brackets in many different locations based on your specific needs. Mounting hole measures 16.5mm. This is the same dimension as most shock mount bolts and several other suspension components.
|
Rennline Race Hook (universal) 5,6,7, or 8 inch - Porsche E01X
Rennline's steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events.
|
|
|
|
Rennline Race Hook (universal) - 9in - 12in (Adjustable) E01-12
|
|
Rennline Front and Rear Tie Down/ Jack Plate Set - Porsche 997/996/Boxster/Cayman Tie Down / Jack Plate Set E32.04
|
|
|
|
|
|
|
|
Rennline Race Hook (universal) - 9in - 12in (Adjustable) E01-12
Rennline's steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events.
|
Securing a 997/996/Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from Rennline. These hooks have been specifically engineered to bolt to the front and rear of your car without any modification .
|
|
|
