|
MAP 2.5" Lower Intercooler Pipe Brushed Stainless Steel Evo 8/9 MAP EVO-LICP
|
|
MAP 2.5" Lower Intercooler Pipe Black Ceramic Evo 8/9 MAP EVO-LICPblk
|
|
Forge Motorsport Silicone Intercooler Hoses for Mitsubishi EVO 8 9 forge-int-hose-kit
|
|
|
|
|
|
|
|
MAP 2.5" Lower Intercooler Pipe Brushed Stainless Steel Evo 8/9 MAP EVO-LICP
This MAP lower intercooler pipe features 304 stainless steel tubing that has been routed with optimal flow characteristics in mind and a 2.5" to 2" reducing elbow that yields the smoothest possible transition from the turbo outlet. Matching T-bolt clamps are also included so that you have everything needed for installation.
|
MAP 2.5" Lower Intercooler Pipe Black Ceramic Evo 8/9 MAP EVO-LICPblk
This MAP lower intercooler pipe features 304 stainless steel tubing that has been routed with optimal flow characteristics in mind and a 2.5" to 2" reducing elbow that yields the smoothest possible transition from the turbo outlet. Matching T-bolt clamps are also included so that you have everything needed for installation.
|
Forge Motorsport Silicone Intercooler Hoses for Mitsubishi EVO 8 9 forge-int-hose-kit
Six Silicone Intercoolers hoses available in a choice of colours for the Lancer Evo 8/9 (US spec models)
Please be aware that these hoses were patterned from right hand drive vehicles. Whilst we believe these to be correct for left hand drive vehicles we suggest that you visually check their suitability, as replacement items, with those fitted to your own vehicle, before attempting installation.
|
|
|
|
STM Front Mount Intercooler Evolution VIII-IX
|
|
STM FRONT MOUNT INTERCOOLER EVO VIII-IX
|
|
STM 3" UPPER INTERCOOLER RACE PIPE KIT EVO VIII-IX
|
|
|
|
|
|
|
|
STM Front Mount Intercooler Evolution VIII-IX
The all new STM Evo VIII-IX Intercooler is made in-house from a 900 HP-rated 3.8" Garrett core with tig-welded, aluminum end tanks and bead-rolled 2.5" or 3" pipe outlets. Pressure tested to 50 psi. This intercooler is a stock-replacement and will bolt right up to your factory couplers, or stock-location, aftermarket piping.
This does not clear the factory crash bar. We do make an aftermarket support bar that it will fit with. STM FRONT BUMPER SUPPORT
May require slight trimming of the front bumper for proper fitment.
Options for the pipe outlet (to upper intercooler pipe) are available if you're running a 2.5" or 3" upper IC pipe. Inlets come standard at 2.5"
- 900 HP Rated Garrett Core
- Tig Welded Aluminum
- 3.8" Core
- 2.5" or 3" Bead-Rolled Pipe Outlets
- Pressure tested to 50 psi
- Made in the USA!
|
STM Front Mount Intercooler
- Evolution VIII-IX
The all new STM Evo VIII-IX Intercooler is made in-house from a 900 HP-rated 3.8" Garrett core with tig-welded, aluminum end tanks and bead-rolled 2.5" or 3" pipe outlets. Pressure tested to 50 psi. This intercooler is a stock-replacement and will bolt right up to your factory couplers, or stock-location, aftermarket piping.
|
The STM Upper Intercooler Race Pipe Kit for the Evo VIII-IX is tig welded, 3" aluminum piping for those needing a little extra capacity for their boost! The 3" aluminum features light-weight benefits and includes 6 stainless T-Bolt clamps and 3 high-quality black, silicone couplers. We run 3" piping on our cars up to 50 psi.
It is pictured with a TiAL flange and is also available with a HKS or Greddy.
|
|
|
|
STM LOWER INTERCOOLER PIPE FORWARD FACING MANIFOLD EVO VIII-IX
|
|
STM BELLMOUTH 6" INTAKE EVO VIII-IX
|
|
STM 2.5" UPPER INTERCOOLER PIPE KIT EVO VIII-IX
|
|
|
|
|
|
|
|
STM Aluminum Lower Intercooler Pipe for STM Forward Facing Manifold
Evo VIII-IX.
The STM Aluminum Lower Intercooler Pipe features polished, tig welded, 2.5" piping and is designed for the STM Forward Facing Manifold. Designed to fit STM, Buschur or a similiar intercooler. Includes high quality STM silicone couplers and stainless T-Clamps.
|
STM Intake Pipe Kit
- Evolution VIII-IX
The STM Bellmouth Intake Pipe Kit is tig-welded in-house of 3" lightweight aluminum and incorporates a 6" velocity stack to utilize the air space of a giant K&N filter to keep air flowing smoothly into the turbo. We include an STM silicone coupler and worm clamps for simple and clean install.
|
The STM Upper Intercooler Pipe Kit for the Evo VIII-IX is tig welded, 2.5" aluminum piping for light-weight benefits and includes 6 stainless T-Bolt clamps and 3 high-quality black, silicone couplers.
It is pictured with a TiAL blow off valve flange and is also available with a stock Evo flange.
|
|
|
|
STM LOWER INTERCOOLER PIPE (STOCK FRAME TURBO) | EVO VIII-IX
|
|
Mitsubishi Evolution 8 & 9 Injen Air Filter w/ Intercooler Piping Kit injenpiping
|
|
|
|
|
|
|
|
STM Aluminum Lower Intercooler Pipe
Evo VIII-IX.
The STM Aluminum Lower Intercooler Pipe features polished, tig welded, 2.5" piping and is designed for the factory turbo or stock frame turbo cars running STM, Buschur or a similiar Intercooler. Includes high quality STM silicone couplers and stainless T-Clamps.
|
The only intake system youneed in your EVO VIII or EVO IX it works with both! With an amazing gain of up to 22hp, the SP1898 features a cast multi-stage tuned mid section for volumized airflow throughout the entire power band.
|
|
|
