Home > Select Your Car > MITSUBISHI > Mitsubishi Eclipse 1G 90-94 > Fuel System >

STM FUEL PUMP REWIRE KIT
STM FUEL PUMP REWIRE KIT
 
Our Price: $45.00


Product Code: STM-FUEL-PUMP-REWIRE-KIT
Qty:

Description
 

STM FUEL PUMP REWIRE KIT


The STM kit includes:
- Relay
- Relay pigtail
- 16' power cable
- 3' ground cable
- (2) 10 gauge ring terminals
- In-line fuse holder
- 30 amp fuse
- 5 cable ties
- Black wire loom
And step by step instructions to get your fuel pump the power it needs!


Because this kit works on so many different cars we will not go into depth on any one in particular, however feel free to contact us with any questions.

1. Disconnect battery.

2. Run power wire from the battery to the fuel pump location.

DO NOT CONNECT THE POWER WIRE TO THE BATTERY YET!

1G FWD: To tank under car. We recommend running the wire through the car and drilling a hole out to the pump loaction.
1G AWD: Rear driver side, in the trunk.
2G: Passenger side, under rear seat.
EVO VIII-IX: Driver side under rear seat.

Now that you have the wire run from the battery to the pump loaction the relay is wired as follows. We suggest soldering all connections.

#30 (blue wire) - feed wire from battery.
#87A (red wire) - not used.
#87 (yellow wire) - when cutting stock 12V pump wire, this is to the pump side.
#86 (black wire) - when cutting stock 12V pump wire, this is to the car side.
#85 (white wire) - chassis ground.
These are the numbers shown on the bottom of the relay where the prongs are. Now that everything is wired in properly, you may hook up the power wire. Have fun.

More information and detailed instructions can be found on VFAQ.

Share your knowledge of this product. Be the first to write a review »
We accept Mastercard, Visa, American Express, and Discover