|
Rexpeed FRS/BRZ Triple Dash Gauge Pod
|
|
Rexpeed FRS / BRZ Double Pillar Pod
|
|
Rexpeed FRS/BRZ Dry Carbon Crown Meter Cover
|
|
|
|
|
|
|
|
|
FRS/BRZ Triple Dash Gauge Pod
Made from black ABS plastic. Each pod comes painted to match the interior color. Pod comes precut in 52mm size but can be trimmed to fit 60mm gauges.
Fits 52 and 60mm gauges. Includes 3M adhesives
|
Rexpeed FRS/BRZ Double Pillar Pod
Made from high quality ABS plastic to match factory pillar colors. Pods comes in 52mm sizes and will fit 60mm gauges as well by making the holes larger with a dremel. With this option customer can have different size gauge setups if they wish. Gauge pod goes over factory pillars and are secured with adhesives.
NOTE:For off-road use and display purposes only.
|
FRS/BRZ Dry Carbon Crown Meter Cover Made from high quality twill weave carbon fiber with clear coat finish. These covers are only 0.3mm thick which in turn will not look bulky once installed. Comes with pre-installed double side adhesive on back side for easy installation.
|
|
|
|
Rexpeed FRS/BRZ Dry Carbon Radio/Dash Trim Cover
|
|
Rexpeed FRS/BRZ Dry Carbon Steering Wheel Cover
|
|
Rexpeed FRS/BRZ Dry Carbon Shift Trim Cover
|
|
|
|
|
|
|
|
|
FRS/BRZ Dry Carbon Radio/Dash Trim Cover Made from high quality twill weave dry carbon fiber with clear coat finish. These covers are only 0.3mm thick which in turn will not look bulky once installed. Comes with pre-installed double side adhesive on back side for easy installation. Price includes radio and dash panel cover total 2 pieces. Fits left hand drive models only.
|
FRS/BRZ Dry Carbon Steering Wheel Cover Made from high quality twill weave carbon fiber with clear coat finish. These covers are only 0.3mm thick which in turn will not look bulkly once installed. Comes with pre-installed double side adhesive on back side for easy installation.
|
FRS/BRZ Dry Carbon Shift Trim Cover Made from high quality twill weave carbon fiber with clear coat finish. These covers are only 0.3mm thick which in turn will not look bulky once installed. Comes with pre-installed double side adhesive on back side for easy installation
|
|
|
|
Rexpeed FRS/BRZ Dry Carbon E-Brake Handle
|
|
Rexpeed FRS/BRZ Carbon Door Handle Full Replacements
|
|
Rexpeed FRS/BRZ Carbon Dash Trim Full Replacement
|
|
|
|
|
|
|
|
|
FRS/BRZ Dry Carbon E-Brake Handle Complete the look of your FRS/BRZ interior trim with this top quality E-Brake Handle. Made from real dry carbon fiber with chrome finish.
|
FRS/BRZ Carbon Door Handle Full Replacements The door handles are OEM factory full replacements parts wrapped in twill weave carbon fiber for perfect fitment. Each piece comes with clear coat finish. Sold in pairs.
|
FRS/BRZ Carbon Dash Trim Full Replacement This carbon dash is OEM factory full replacement part wrapped in twill weave carbon fiber for perfect fitment. Each dash piece come with clear coat finish. This item is a single piece for the passenger side only.
|
|
|
|
Rexpeed Carbon Shift Trim Full Replacement
|
|
Rexpeed FRS/BRZ Carbon Steering Wheel Trim Full Replacement
|
|
Rexpeed FRS/BRZ STI Style Carbon Skirts
|
|
|
|
|
|
|
|
FRS/BRZ Carbon Shift Trim Full Replacement The shift trim is OEM factory full replacement part wrapped in twill weave carbon fiber for perfect fitment. Each piece comes with clear coat finish. |
FRS/BRZ Carbon Steering Wheel Trim Full Replacement The steering wheel trim is OEM factory full replacement part wrapped in twill weave carbon fiber for perfect fitment. Each piece comes with clear coat finish.
|
FRS/BRZ STI Style Carbon Skirts Made from high quality carbon fiber with clear coat finish. Enhance your BRZ with a pair of these side skirts and stand out from the crowd.
Currently we are only shipping the side skirt extensions to United States, United Kingdom, Australia and sout east asia. If you are located in a different country please email us for shipping price quote. Install picture is for reference only. Sold in pairs. Install picture is for reference only
free shipping in the us use coupon code shipitfree
|
|
|
|
Rexpeed FRS/BRZ C-Style Side Skirt Extensions
|
|
Rexpeed FRS/BRZ TRD Style Skirts
|
|
Rexpeed FRS/BRZ Carbon A Pillar Trim
|
|
|
|
|
|
|
|
|
BRZ C-Style Side Skirt Extensions Made from high quality carbon fiber with clear coat finish. Enhance your cars look with a pair of these side skirt extensions and stand out from the crowd. Utilizes factory mounting locations for easy install. No drilling or modifications needed to install the side skirts. Sold in pairs.
Currently we are only shipping the side skirt extensions to United States, United Kingdom, Australia and sout east asia. If you are located in a different country please email us for shipping price quote.
|
FRS/BRZ TRD Style Skirts Made from high grade ABS plastic material. Kit comes with necessary hardware for easy installation. This item will only be shipped to USA, Canada, United Kingdom, Asia and South East Asia. If you live in different country other than the ones listed please contact us for shipping quote.
|
FRS/BRZ Carbon A Pillar Trim Made from real twill weave carbon fiber. Comes with ahdesive on backside just peel and apply to vehicle. Note: It is normal that one strip is longer than the other please pay attention during install.
|
|
|
|
Rexpeed FRS/BRZ Carbon Rear Bumper Extensions
|
|
Rexpeed FRS/BRZ Dry Carbon Door Handle Cover
|
|
Rexpeed FRS/BRZ Dry Carbon Door Handle Base Cover
|
|
|
|
|
|
|
|
|
BRZ Carbon Rear Bumper Extensions Made from 2x2 weave carbon fiber with clear coat finish. Great add on piece to compliment the side skirt extensions. Easy bolt on installation includes hardware.
|
FRS/BRZ Dry Carbon Door Handle Cover Made from high quality twill weave carbon fiber with clear coat finish. These covers are only 0.3mm thick which in turn will not look bulkly once installed. Comes with pre-installed double side adhesive on back side for easy installation. Total 4 pieces included.
|
FRS/BRZ Dry Carbon Door Handle Base Cover Made from high quality twill weave carbon fiber with clear coat finish. These covers are only 0.3mm thick which in turn will not look bulkly once installed. Comes with pre-installed double side adhesive on back side for easy installation
|
|
|
|
Rexpeed FRS/BRZ Dry Carbon Trunk Garnish Cover
|
|
Rexpeed FRS/BRZ Vortex Generator
|
|
Rexpeed FRS/BRZ VA-Style Carbon Fender Garnish
|
|
|
|
|
|
|
|
|
FRS/BRZ Dry Carbon Trunk Garnish Cover Made from high quality twill weave carbon fiber with clear coat finish. These covers are only 0.3mm thick which in turn will not look bulkly once installed. Comes with pre-installed double side adhesive on back side for easy installation.
|
FRS/BRZ Vortex Generator Vortex Generator is made from ABS plastic for precise fitment. Comes with adhesives for easy install. Vortex generator helps direct air towards the rear to create more downforce which in turn helps reduce turbulance.
|
BRZ VA-Style Carbon Fender Garnish Trick out your BRZ with these sick looking carbon pieces. Made from high grade twill weave carbon fiber with clear coat finish. These are full replacements and come with adhesives for easy install.
|
|
|
|
Rexpeed FRS/BRZ STI Style Carbon Rear Bumper Extensions
|
|
Rexpeed FRS/BRZ TRD Style Carbon Trunk Spoiler
|
|
Rexpeed BRZ/FRS TRD Style FRP Trunk Spoiler
|
|
|
|
|
|
|
|
|
BRZ STI Style Carbon Rear Bumper Extensions Made from 2x2 weave carbon fiber with clear coat finish. Great add on piece to compliment the side skirt extensions. Easy bolt on installation includes hardware. Install picture is for refernce only
|
FRS/BRZ TRD Style Carbon Trunk Spoiler Made from 2x2 weave with clear coat finish. Includes 3M adhesives for easy install.
|
BRZ/FRS TRD Style FRP Trunk Spoiler Made from strong lightweight fiberglass material. Each spoiler includes 3M adhesives.
|
|
|
|
Rexpeed BRZ/FRS STI Style Carbon Splitter
|
|
Rexpeed BRZ/FRS Carbon Mirror Covers
|
|
Rexpeed BRZ/FRS Polarized Mirrors
|
|
|
|
|
|
|
|
|
BRZ STI Style Carbon Splitter Each lip is made from high quality carbon fiber with clear coat finish. Comes with all necessary hardware for a complete install. Available in 2x2 weave only.
Currently we are only shipping the splitters to USA, United Kingdom Canada and south east asia. If you are located in a different country please email us for shipping price quote. Install picture is for refernce only. The actual item will be made from carbon fiber.
|
BRZ Carbon Mirror Covers Carbon mirrors are made from vacuum bagging for consistency and perfect fitment. Kit comes with double side adhesives for easy install. Fits FRS and BRZ models
|
BRZ Polarized Mirrors Check out these new released polarized mirrors for your BRZ! The polarized mirrors are full replacements to remove factory mirror just pry it with your fingers they pop right off. Fits FRS and BRZ models
|
|
|
|
Rexpeed BRZ/FRS Carbon Hood Dampers
|
|
Tomei UNEQUAL LENGTH EXHAUST MANIFOLD FR-S / BRZ
|
|
GSC Power-Division Single Valve Spring Kit for FA20 BRZ/FRS
|
|
|
|
|
|
|
|
|
BRZ Polarized Mirrors Check out these new released polarized mirrors for your BRZ! The polarized mirrors are full replacements to remove factory mirror just pry it with your fingers they pop right off. Fits FRS and BRZ models
|
The FA20 boxer engine inside the Scion FR-S/Subaru BRZ can be said to be the successor to the EJ engine. At Tomei Powered, through our extensive testing, we've produced numerous EJ engine and exhaust parts. By applying our knowledge and experience of EJ engines to the ZN6/ZC6, we conducted even further tests to produce 2 new exhaust manifolds with different characteristics. Using this in conjunction with our new joint pipe, released at the same time, can yield even better results.
|
All new GSC Power-Division Single, Cylindrical Spring kit for the Subaru BRZ, Scion FRS and Toyota FT86 using the new 2.0L NA boxer engine. These are great for boosted applications or high revving NA engines needing more spring with out breaking the bank.
|
|
|
|
Fluidampr Engine Damper 2015 WRX / 2013+ BRZ 2015 Subaru WRX
|
|
Grimmspeed Head to Exhaust Manifold Dual PortCollectors Gasket(Pair)
|
|
Grimmspeed 2.25"/2.5" Universal Exhaust Gasket
|
|
|
|
|
|
|
|
|
A Fluidampr performance damper creates a foundation for improved durability and performance by providing long lasting, broad range protection against destructive crankshaft torsional vibration commonly found with engine modifications. It is recommended to install a Fluidampr performance damper early in an engine build for optimum benefits.
|
GrimmSpeed OEM Style Gasket, OEM quality without the high OEM price.
At GrimmSpeed we have worked with endless amounts of aftermarket gaskets, none seem to work as well as the multi-layer steel oem style gaskets. The issue with the oem gaskets from Subaru is that they are so expensive. Well Grimmspeed has your answer, premium multi-layer steel w/ stainless steel fire-ring gaskets at a great price.
|
Grimmspeed has worked with endless amounts of aftermarket gaskets, none seem to work as well as the multi-layer steel gaskets. The issue with the most T4 gaskets is that even if they're multi-layer, they're not completely constructed of Stainless Steel which leads to leaks. Well Grimmspeed has your answer, a premium multi-layer stainless steel w/ stainless steel fire-ring gasket at a great price. This particular gasket is designed to fit most 2-bolt Subaru 2.5" applications. We've provided dimensions below, so that you can verify fitment prior to purchase!
|
|
|
|
Grimmspeed Cold Air Intake - BRZ/FRS Black
|
|
Grimmspeed Cold Air Intake - BRZ/FRS Red
|
|
Grimmspeed Master Cylinder Brace - Subaru BRZ and Scion FR-S
|
|
|
|
|
|
|
|
|
Design requirements for this intake were simple: The intake must not only be safe for the engine, but perform well both with and without tuning. The intake must be able to be installed quickly, without removal of the bumper. The intake must produce horsepower and torque gains throughout the RPM range, not just on the top end. Justification for the first is obvious, Grimmspeed wants you to be able to bolt it on and go, without worrying about your air-fuel ratios and engine safety. Justification for the second came after installing other intakes, only to have our front bumper never fit the same way again. A little research showed that this was a common issue. Yuck.
|
Design requirements for this intake were simple: The intake must not only be safe for the engine, but perform well both with and without tuning. The intake must be able to be installed quickly, without removal of the bumper. The intake must produce horsepower and torque gains throughout the RPM range, not just on the top end. Justification for the first is obvious, Grimmspeed wants you to be able to bolt it on and go, without worrying about your air-fuel ratios and engine safety. Justification for the second came after installing other intakes, only to have our front bumper never fit the same way again. A little research showed that this was a common issue. Yuck.
|
Crafted from hardcore CNC laser cut 12L14 with multi-point welded fabrication. It is the Abrams Tank of master cylinder braces touting 4 factory mounting points, the most available from any brace. Powdercoated black this brace will outlive your car and win you some style points to boot. Most importantly this brace kit will kill your wimpy pedal feel and give you the immediate and tight response that your performance car deserves and needs when you hit the track or rally. This brace will give you the confidence similar to that of SS braided brake lines with precision stopping. Not to mention street driving just got a whole lot more fun!
|
|
|
|
Grimmspeed License Plate Relocation Kit - Subaru Legacy '10+/Outback '10+/BRZ '13+ Scion FR-S '13+
|
|
Grimmspeed Lightweight Crank Pulley Blue - Subaru All FA/FB Engines
|
|
Grimmspeed Lightweight Crank Pulley Black - Subaru All FA/FB Engines
|
|
|
|
|
|
|
|
|
License plates are a necessary evil on the front of our cars, but you can save your front bumper from looking boring or blocking flow to your FMIC with the GrimmSpeed License Plate Relocation Kit. Utilizing our unique Infinite-Adjust design allows for virtually any mounting position and angular adjustment so you can mount it where you want it! Our simple design mounts in the OEM tow hook location for maximum support while providing you with the largest range of adjustment available on the market. With laser cut and powder coated 5052 Aluminum, this bracket will hold your plate confidently in place while looking sharp and light. Each tow hook adapter is custom designed and CNC machined from 12L14 and then treated with black zinc for an indestructible and perfect fit.
|
In GrimmSpeed's opinion, the OEM Subaru crank pulley has been a cause for concern ever since its original design. It is relatively heavy, susceptible to catastrophic failure, and quite unsightly. Continuing to use this on cars just wouldn't do. Eliminating rotational mass while maintaining a safe presence can increase reliability and bring faster Rev's! For this Lightweight Crank Pulley GrimmSpeed pulled out all of the stops. CNC machined from 6061 T6 Aluminum this pulley makes no compromise. It weighs in at 3.5lbs lighter than OEM while at the same time increasing its durability. Marked with a timing mark and perfect cut keyway makes this install a breeze. GrimmSpeed designed the pulley with the optimum weight for performance while avoiding misfire CEL's and engine hesitation.
|
In GrimmSpeed's opinion, the OEM Subaru crank pulley has been a cause for concern ever since its original design. It is relatively heavy, susceptible to catastrophic failure, and quite unsightly. Continuing to use this on cars just wouldn't do. Eliminating rotational mass while maintaining a safe presence can increase reliability and bring faster Rev's! For this Lightweight Crank Pulley GrimmSpeed pulled out all of the stops. CNC machined from 6061 T6 Aluminum this pulley makes no compromise. It weighs in at 3.5lbs lighter than OEM while at the same time increasing its durability. Marked with a timing mark and perfect cut keyway makes this install a breeze. GrimmSpeed designed the pulley with the optimum weight for performance while avoiding misfire CEL's and engine hesitation.
|
|
|
|
Grimmspeed Lightweight Crank Pulley Red - Subaru All FA/FB Engines
|
|
Grimmspeed Hood Struts - Scion FR-S and Subaru BRZ
|
|
Grimmspeed Strut Tower Brace - BRZ/FRS Black
|
|
|
|
|
|
|
|
|
In GrimmSpeed's opinion, the OEM Subaru crank pulley has been a cause for concern ever since its original design. It is relatively heavy, susceptible to catastrophic failure, and quite unsightly. Continuing to use this on cars just wouldn't do. Eliminating rotational mass while maintaining a safe presence can increase reliability and bring faster Rev's! For this Lightweight Crank Pulley GrimmSpeed pulled out all of the stops. CNC machined from 6061 T6 Aluminum this pulley makes no compromise. It weighs in at 3.5lbs lighter than OEM while at the same time increasing its durability. Marked with a timing mark and perfect cut keyway makes this install a breeze. GrimmSpeed designed the pulley with the optimum weight for performance while avoiding misfire CEL's and engine hesitation.
|
A close collaboration between FT86Club.com members and GrimmSpeed, this kit delivers in a big way. We hate to use the "P" word, but designing this kit to be perfectly balanced was a requirement. Lift the hood halfway and you'll find a generous neutral zone. Leave your hood here for a sleek look at that local car show. Alternatively, a flick of the wrist is all that's required to coax your hood into its fully opened position. To close, simply hold the hood below its neutral zone and let go. No need to risk scratches or deformation by pushing your hood closed.
|
You've probably read somewhere on the internet that a strut tower brace never does anything but look pretty. You're about to read otherwise. Armed with a strong background in vehicle dynamics and chassis design, GrimmSpeed has spent months understanding the BRZ/FR-S chassis, testing different designs, collecting data and measuring performance. With the help of the FT86Club community, GrimmSpeed has developed a strut tower brace that works.
|
|
|
|
Grimmspeed Strut Tower Brace - BRZ/FRS Red
|
|
Grimmspeed Pulley Cover Stainless BRZ/FR-S
|
|
Grimmspeed Pulley Cover Red BRZ/FR-S
|
|
|
|
|
|
|
|
|
You've probably read somewhere on the internet that a strut tower brace never does anything but look pretty. You're about to read otherwise. Armed with a strong background in vehicle dynamics and chassis design, GrimmSpeed has spent months understanding the BRZ/FR-S chassis, testing different designs, collecting data and measuring performance. With the help of the FT86Club community, GrimmSpeed has developed a strut tower brace that works.
|
Booya! Add a bit of style and function to your engine bay with this simple but elegant and first of it's kind pulley cover, featuring the world famous GrimmSpeed tool tray. This cover mounts securely in place of your plastic factory covers and its asymmetric design compliments the BRZ/FR-S engine bay nicely. Available in brushed stainless steel, as well as our two standard texture DuPont powdercoat finishes, there's an option for everybody.
|
Booya! Add a bit of style and function to your engine bay with this simple but elegant and first of it's kind pulley cover, featuring the world famous GrimmSpeed tool tray. This cover mounts securely in place of your plastic factory covers and its asymmetric design compliments the BRZ/FR-S engine bay nicely. Available in brushed stainless steel, as well as our two standard texture DuPont powdercoat finishes, there's an option for everybody.
|
|
|
|
Grimmspeed Pulley Cover Black BRZ/FR-S
|
|
Grimmspeed Battery Tie Down - Subaru Impreza/WRX/Sti/Legacy/Forester/Baja/BRZ and Scion FR-S
|
|
Tomei EQUAL LENGTH EXHAUST MANIFOLD FR-S / BRZ
|
|
|
|
|
|
|
|
|
Booya! Add a bit of style and function to your engine bay with this simple but elegant and first of it's kind pulley cover, featuring the world famous GrimmSpeed tool tray. This cover mounts securely in place of your plastic factory covers and its asymmetric design compliments the BRZ/FR-S engine bay nicely. Available in brushed stainless steel, as well as our two standard texture DuPont powdercoat finishes, there's an option for everybody.
|
Clean up that engine bay and show your boxer pride with our new Battery Tie Down. GrimmSpeed started out with a block of 6061 Aluminum, threw in a bunch of CNC Milling time, dropped it in the anodizing tank for a custom matte finish, and then on top of that we found an expert painter to individually hand paint the red into each GrimmSpeed Battery Tie Down! Yes, its that cool.
Setting the precedent for high-end, it's what you can expect from GrimmSpeed
|
The FA20 boxer engine inside the Scion FR-S/Subaru BRZ can be said to be the successor to the EJ engine. At Tomei Powered, through our extensive testing, we've produced numerous EJ engine and exhaust parts. By applying our knowledge and experience of EJ engines to the ZN6/ZC6, we conducted even further tests to produce 2 new exhaust manifolds with different characteristics. Using this in conjunction with our new joint pipe, released at the same time, can yield even better results.
|
|
|
|
Tomei JOINT PIPE FR-S / BRZ - OVERPIPE
|
|
|
|
|
|
|
|
|
Larger diameter for improved exhaust efficiency and precision clearance design The stock joint pipe is not only narrow, it also has flattened sections which severely limits the performance gains from fitting a high efficiency manifold. However, our new pipe has its sections welded together to maintain a wide Φ60.5 diameter throughout with additional weld beads on the inside for rigidity.
|
|
|
