These engine mounts replace the OEM top and lower engine mounts. This combination will reduce 90% of wheel hop and engine movement to improve shifting, traction, and prevent damage to the intercooler hoses and exhaust systems due to excessive engine movement. These mounts have less vibrations when compared too the other aftermarket mounts. Take a look at the amount of urethane we use on each mount. We use 50% more urethane then all out competitors. These are the same mounts in the fastest world challenge Neon SRT-4's in the world.

 

Torque Solution is proud to offer the best complete engine mount set available for the Dodge Neon SRT-4. All mounts are made out of high grade billet aluminum material machined to the tightest tolerances. All the mounts bushings are made with 50% more urethane giving you the least amount of vibrations when compared to the competitors. These engine mounts are the lightest on the market. They can be seen on the fastest World Challenge Neon SRT-4's in the world. Wheel hop is notorious for snapping axles. Consider that a thing of the past. This combination of mounts will eliminate wheel hop giving you optimal traction under the harshest of conditions while saving your axles.These are the same mounts in the fastest world challenge Neon SRT-4's in the world.

 

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-Street and track torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Life Time Warranty

Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins.These mounts can be seen on some of the fastest street and track EVO's in the world. Our mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting mounts that will be reliable for years to come and help you win on race day!

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty

Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins.These mounts can be seen on some of the fastest street and track EVO's in the world. Our mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting mounts that will be reliable for years to come and help you win on race day!

Torque Solution motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins. These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following -5spd trans mount -side engine mount -front engine mount

- Eliminates wheel hop / traction loss
- mproved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty

 

The Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins. Here at Torque Solution our mounts are anodized black with torque solution laser engraved. These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following -side engine mount -front engine mount -6spd trans mount

Torque Solution EVO motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins.These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following. -Side engine mount -Rear engine mount -5 spd trans mount

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- 1000HP+ and 8sec e.t. torture tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Life Time Warranty

 

Torque Solution  motor mounts are made from high grade billet a aluminum material, polyurethane bushings, and steel pins. These mounts can be seen on some of the fastest street and track EVO's in the world. These mounts have been tortured tested and proven to hold over 1000HP and 8sec 1/4 mile e.t's. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mounts that will be reliable for years to come and help you win on race day! This kit comes with the following -Side engine mount -Rear engine mount -6 spd trans mount

 

•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•1000HP+ and 8sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty
•
 

 

Torque Solution engine & transmission mounts are made from high grade 6061 billet aluminum material. The factory mount is a rubber material that cracks and contains a viscous oil and is prone to failure leaving fluid all over the engine bay. Torque Solution mounts come standard w/ Limited Lifetime Warranty polyurethane bushings giving you peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. These mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

*Will fit all Audi/VW vehicles with transverse mounted 2.0T FSI and TSI engines.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Real World Torture Tested
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

 

The Torque Solution mount kit is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the left, right, and rear engine mount. This mount kit can be seen in some of the fastest Hondas on the street and at the track!

*This kit is designed to be used with the stock D series engine (w/ 2 Bolt Left Mount) and transmission in the 92-95 Civic. Also compatible with with B series Engine with 2 Bolt Left Hand Bracket.

 

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Limited Lifetime Warranty

 

The Torque Solution mount kit is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This is a direct replacement of the left, right, and rear engine mount. This mount kit can be seen in some of the fastest Hondas on the street and at the track!

*This kit is designed to be used with the stock B series engine (w/ 3 Bolt Left Mount) and transmission in the 94-01 Integra. Also compatible with with D series Engine with 3 Bolt Left Hand Bracket.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight 6061-T6 billet aluminum
-1000HP+ torture tested
-Black anodized / Torque Solution Laser engraved
-75A durometer bushings
-Limited Lifetime Warranty

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings (Dog Bone)
- 90A durometer (Race Insert)
- Limited Lifetime Warranty

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings (Dog Bone)
- 75A durometer (Street Insert)
- Limited Lifetime Warranty

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings (Mounts)
- 90A durometer (Race Insert)
- Limited Lifetime Warranty

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings (Mounts)
- 75A durometer (Street Insert)
- Limited Lifetime Warranty

Torque Solution Pendulum Mount (Dog Bone) is made from high grade 6061 billet aluminum material. Torque Solution mounts come standard w/ Limited Lifetime Warranty on our polyurethane bushings giving you peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. Our mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Works with all aftermarket Dog Bone inserts
- Limited Lifetime Warranty

Torque Solution Pendulum Mount (Dog Bone) w/ Race Insert is made from high grade 6061 billet aluminum material. Torque Solution mounts come standard w/ Limited Lifetime Warranty on our polyurethane bushings giving you peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. Our mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

**Fits all Audi vehicles with transverse mount engines years 2005.5-2008 (FSI 2.0T).

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings (Dog Bone)
- 90A durometer (Race Insert)
- Works with all aftermarket Dog Bone inserts
- Limited Lifetime Warranty

Torque Solution Pendulum Mount (Dog Bone) w/ Street Insert is made from high grade 6061 billet aluminum material. Torque Solution mounts come standard w/ Limited Lifetime Warranty on our polyurethane bushings giving you peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. Our mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

**Fits all Audi vehicles with transverse mount engines years 2005.5-2008 (FSI 2.0T).

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings (Dog Bone)
- 75A durometer (Street Insert)
- Limited Lifetime Warranty

Torque Solution Pendulum Mount (Dog Bone) w/ Race Insert is made from high grade 6061 billet aluminum material. Torque Solution mounts come standard w/ Limited Lifetime Warranty on our polyurethane bushings giving you peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. Our mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

**Fits all Audi vehicles with transverse mount engines years 2009+ (2.0T, 2.5L, 3.2L, 3.6L).

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings (Dog Bone)
- 90A durometer (Race Insert)
- Limited Lifetime Warranty

Torque Solution Pendulum Mount (Dog Bone) w/ Street Insert is made from high grade 6061 billet aluminum material. Torque Solution mounts come standard w/ Limited Lifetime Warranty on our polyurethane bushings giving you peace of mind. By tightening up the drive line you are allowing the car to put more power to the ground and into the rotating tires. Our mounts have been tortured tested and proven to last a lifetime. Our mounts bring world class performance to you for an affordable cost. Rest assured you are getting a mount that will be reliable for years to come and to help you win on race day!

**Fits all Audi vehicles with transverse mount engines years 2009+ (2.0T, 2.5L, 3.2L, 3.6L).

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings (Dog Bone)
- 75A durometer (Race Insert)
- Limited Lifetime Warranty

Torque Solution is proud to offer a complete 10 piece urethane refresh kit for our 3 piece Neon SRT-4 engine mount kit part # TS-DNSRT-123.

-Street and track torture tested
-75A durometer bushings

Our Engine Mount Kit is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins.


Our 3 piece mount kit includes driver, passenger and rear engine mounts.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Steel Mounting Bracket
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Our engine mount kit is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This mount kit is a direct replacement of the OEM mounts especially the liquid filled engine mount, which tends to fail even on completely stock Civics.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Steel Mounting Bracket
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Our engine mount kit is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins. This mount kit is a direct replacement of the OEM mounts especially the liquid filled engine mount, which tends to fail even on completely stock Civics.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Steel Mounting Bracket
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Our Engine Mount Kit is designed to produce crisper gear shifts by preventing the front end of the engine from pitching up or down, forward and back. Improves traction and reduces wheel hop. All Torque Solution engine mounts are are made of high grade billet aluminum material, urethane bushings, and steel pins.


Our 3 piece mount kit includes driver, passenger and rear engine mounts.

- Eliminates wheel hop / traction loss
- Improved 60fts / e.t's
- Made out of lightweight 6061-T6 billet aluminum
- Steel Mounting Bracket
- Black anodized / Torque Solution Laser engraved
- 75A durometer bushings
- Limited Lifetime Warranty

Applications: Subaru WRX 2006-2015 / STI 2006-2016

Applications: Subaru WRX 2006-2015 / STI 2006-2016

Applications: Subaru WRX 2006-2015 / STI 2006-2016

Applications: Subaru WRX 2006-2015 / STI 2006-2016

Applications: Subaru WRX 2006-2015 / STI 2006-2016

Applications: Subaru WRX 2006-2015 / STI 2006-2016

Applications: Subaru WRX 2006-2015 / STI 2006-2016